Displays the focus mode that is set on the camera; this is a display only control. The Focus Mode is changed either by a physical switch located on the front left side of the camera or is changed by the Autofocus Mode settings on those cameras that do not have a physical switch on the Camera.
The physical switch settings are ether AF/M or S/C/M depending on the camera model. The M setting is used for Manual focus while the other settings are for Autofocus.
With those camera that do not have a physical switch, the MF Selected setting is used to set Manual Focus from the program and can only be set if the Lock Camera is enabled.
Copyright © 2018 J-ProSoftware, LLC