Navigation: CameraRC Deluxe Help - Version 2.4.3 > Main Options Window  > Live View/Composition Aids Panel > Live View Tab >

Show Exposure Meter

Send comments on this topic.

 

 

When in Live view you can also enable an exposure meter on the live view display by checking the Show Exposure Meter checkbox located in the Live View controls section. The exposure meter will normally read zero unless the Exposure Mode is set to Manual or Exposure Compensation is applied.

 

NOT supported on D40, D40X, D60, D80, or D200.

 

Copyright © 2018 J-ProSoftware, LLC